Temeraire Class

From LCARS
Revision as of 08:34, 31 January 2012 by Baxter (talk | contribs)
Jump to: navigation, search

This UCIP LCARS article is a summary of a UCIP canon vessel. To learn more, visit this technical reference.



Starship Class Data
Name Temeraire
Type Battle Cruiser
Role Heavy Combat Cruiser
Produced 2
Affiliation Federation
TechStatus UCIP Canon
Contributor Baxter



The USS Temeraire is a first-of-class concept prototype vessel originally built in 2406 for service in First Fleet operations in the Triangulum galaxy. Completed too late for service in that theater of operations, the vessel was mothballed at the Fleet Strategic Reserve at Starbase 319 from 2407-2411. It was reactivated for service at Starbase 99 Versailles in September 2411, where it replaced the Nova class science vessel USS Cerberus.

Overview

Design History

Design of the Temeraire class Battle Cruiser was initiated after a series of exhaustive technical surveys and investigations, submitted to Starfleet Engineering in 2401. Two separate inquiries concluded - in response to widespread reports and rumors of Starfleet vessels and equipment being unsuited for operations in Triangulum - that navigational phenomena native to the Triangulum Galaxy was undermining the efficiency of Starfleet forces. It was confirmed by the inquiries and expert officers that most standard-issue equipment was being worn out at approximately a third faster than design lifespan.

A separate conclusion was that Starfleet forces were often outmatched in combat situations. Larger vessels were unable to counter the faster and more agile enemy vessels.

In response to the panel's conclusions, officers at Marine Corps Base Syronis VI proposed construction of a new class of vessel for use in Triangulum. Contrary to what one might expect from a requirement for a more agile vessel, after an extended period of testing and evaluation, a heavily-modified Sovereign-class variant spaceframe was selected to form the basis for the class.

Throughout the design and construction process, Starfleet R&D sought to maintain a tradeoff of mobility in favor of firepower and resiliency. The designers also sought a vessel that could weather the local navigational phenomena while possessing the firepower required to lead Starfleet formations in heavy-combat engagements.

The completed prototype of the Temeraire class was fielded for testing in late 2406. Engineering analysis soon identified a number of flaws, some of which were considered significant enough to merit further testing. While this was underway, First Fleet was ordered to return to the Federation, and production of further units was halted with the prototype and one unit completed. Six other ships were frozen in the framework stage and later disassembled.

In mid-2408 the two existing units were placed in mothballs and assigned to the Fleet Strategic Reserve. All records were placed in storage and the design team was re-allocated to other projects.

Temeraire class Project Objectives

Pursuant to Starfleet Exploration Directives 1016.8 & 1201.12, Federation Diplomatic Corps Mandate 1477.2.2, Starfleet Defense Directives 218.6, 331.1 & 334.7, Starfleet MACO Directive 117.3, and Federation Security Council General Policy, the following objectives have been established for the Temeraire class Battle Cruiser project:

1. Replace the Nebula, Galaxy, and Sovereign class starships as front-line combat units in the Triangulum Galaxy.

2. Supplement the Sovereign class as an instrument of Federation deep-space defensive, scientific, and diplomatic presence.

3. Provide autonomous capability and logistical support for full execution of small-unit operations.

4. Provide autonomous capability and a multi-mission mobile platform for full execution of Federation defensive, cultural, scientific, and explorative policy in deep space or border territory.

5. Serve as a frontline support vehicle during times of war and emergency.

6. Provide non-critical functions such as transport of personnel and cargo when necessary, extended aid, and long- and medium-range patrol.

7. Provide a mobile platform for testing and implementation of mission-specific or new technology of any kind.


alt text
USS Temeraire (aft view)

Technical Specifications

General Information


Name of Class: Temeraire
Classification: Multi-Role Battle Cruiser [Escort/Explorer/Diplomatic]
Accommodation: 1,038 (135 officers – 753 enlisted – 150 MACOs)
Evacuation Limit: 2,500
Expected Duration: 60 years
Time Before Refit: 10 Years
Time Before Resupply: 3 Years

Dimensions


Length: 740.57m
Width: 230.93m
Draft: 96.37m
Decks: 24 (21 inhabitable)
Armor: Type 3
Mass: 3.69 million metric tons

Propulsion

Main Core Cryogenic M/AM
Warp Drive Matter/Antimatter
Nacelles 2
Normal Cruise Warp 7
Maximum Cruise Warp 8.4
Emergency Speed Warp 8.75 [for 18 hours]
Normal Cruise 0.25c
Emergency Speed 0.712c [for 47 minutes]


Designed several years before class design commenced, the General Electric Class 11c Cryogenic M/ARA drive and power system was selected for installation in the Temeraire class. The Class 11c warp reactor makes use of six-lobed magnetic constriction segment columns that allow for additional reactant streams to surround the primary stream that travels down the center of the magnetic constrictor columns. This allows for a total of seven reactant streams of both matter and antimatter to collide in the dilithium articulation chamber at a higher velocity than the Class 8 warp reactor in the Sovereign class. The intense thermal reaction (a full 26% hotter than a Class 8 warp reactor) necessitates the use of super-chilled cryogenic coolant to keep the reaction process within acceptable safety limits.










Tactical Systems

Phaser Arrays 12 Type-XII [primary]; 4 Type-VIII turrets [secondary]
Torpedo Launchers 3 Forward; 2 Aft
Magazine 210 Quantum Torpedoes; 600 Photon Torpedoes; 25 Graviton Torpedoes; 25 Veteron Torpedoes


The Temeraire class is equipped with 12 Type-XII phaser arrays and 4 Type-X phaser turrets. Four fixed-focus second generation torpedo launchers are located within the secondary hull, with the fore and aft covered by launchers originally developed for the Defiant Class Project. Each launcher is capable of loading five torpedoes in one salvo, typically launched in an alternating interval to reduce the chance that two projectiles may collide in flight.

Phaser Type: The Temeraire class utilizes the latest in starship armament technology, the Type XII array system. Each array fires a steady beam of phaser energy, and the forced-focus emitters discharge the phasers at speeds approaching .986c (which works out to about 182,520 miles per second - nearly warp one). The phaser array automatically rotates phaser frequency and attempts to lock onto the frequency and phase of a threat vehicle's shields for shield penetration.

Phaser Array Output: Each phaser array takes its energy directly from the impulse drives and auxiliary fusion generators. Individually, each type XII -emitter can only discharge approximately 8.0 MW (megawatts) per second. However, several emitters (usually two) fire at once in the array during standard firing procedures, resulting in a discharge of approximately 16 MW.

Torpedo Launcher Arrangement: The Temeraire class retains the Sovereign class swivel-mounted torpedo launcher, mounted on the ventral surface of the primary hull, for use against on highly maneuverable starships. Capable of moving 20-degrees port or starboard off the vehicle's primary axis (as compared to 15 degrees on Sovereign class units), this launcher allows for easier tracking of targets at shorter ranges where torpedoes launched from traditional fixed-focus launchers are often unable to track due to the lack of space for course corrections. It is capable of preloading six torpedoes for rapid fire.


Shields Systems

Sustainable 11,700 MW
Auxiliary Shield 61% of primary efficiency


The Temeraire class includes Tri-Axilated Regenerative Shield Technology (TARST), a variant of the regenerative shield technology first field tested with the Sovereign class before eventual perfection in the Prometheus class prototype. TARST shields make use of redundant shield generators, mounted in clusters of three, which create three meshed shield grids enveloping the entire ship. In combat conditions, the system is capable of creating redundant shields focused on a specific area when integrity drops below a predetermined percentage. This allows the primary shield generator to bear the brunt of incoming fire while the redundant generators remains on hot standby. As the primary generator drops in integrity, power is then increased to the redundant generators which seamlessly take over the burden of shielding for that portion of the ship, allowing the primary generator to once again recharge on standby.

There are 78 shield generators in the Temeraire design, 52 more than the comparable Sovereign class, each one generating 150 MW of output. Altogether, this results in a total shield strength of 11,700 MW (matching the original Sovereign class specifications), but only little over half of that is in actual use at one time due to the nature of regenerative shielding. The power for the shields is taken directly from the warp reactor and impulse fusion generators and transferred by means of high-capacity EPS conduits to the shield generators. If desired, the shields can be augmented by power from the impulse propulsion power plants. The shields can protect against approximately 39% of the total EM spectrum, whereas the Sovereign class is equipped to protect against only about 36%, and the older Galaxy class was rated for 23%.